knightluder

If I want to turn the idle up, which way do I turn the screw, clockwise or counterclockwise?

4bidden

clockwise im almost positive

__________________
-Jeremy | Forbidden Motorsports

Yes....I'm back on PO!

marcucci

CCW raises idle. CW lowers it. Unscrew to raise.

You should NOT need to dick with it unless you swapped TB's or engines. The screw is set from the factory and no amount of dicking with i/h/e should affect it. If you are idling low, you have another problem, more than likely you are running too rich. You should fix that first.

knightluder

I was turning it the wrong frickin way! My lude runs like a dream now. Thanks marcucci.

Heero

where in the world is the idling screw? My car has been rattling like that and since you guys finally talked about it, this might be my main problem! Hook it up guys, tell me how to fix it!!!

knightluder

The idling screw is located on the top left hand side of your intake manifold; right above the throttle body. It should be in between 2 goldish looking bolts. If you are going to adjust the idle...1)Do it slowly 2) Use a flat head screwdriver and 3) For the love of god turn it to the left and not the right. Make sure the car is runing and warmed up as well. Good luck.

SiR-P12eLude

clockwise is positive, counter clockwise is negative...