honda prelude f22b swap - Honda Prelude Forum

prelude si95 · 09-12-2011, 08:02 PM

i just boughta95 prelude si with a jdm f22b swap. if i need parts for motor which parts can i use parts from a h23a1? it tapping idk how to go about it lookin for advice

deaflude · 09-12-2011, 11:47 PM

which f22b? because there are two different engine type. sohc or dohc?

S-LudeDan · 09-13-2011, 05:24 AM

^ he is talking about the DOHC.

here are the specs on it

F22B
2.2 L
Bore × Stroke: 85.0 × 95.0 mm
Displacement: 2156 cc
Valve Configuration: DOHC, 16 valves
Compression ratio: 9.3:1
Max power: 166 hp (119 kW) @ 6000 rpm
Max torque: 150 ft·lbf (200 N m) @ 5000 rpm

deaflude · 09-13-2011, 11:49 PM

Yeah, but there are two different type of JDM f22b. one is sohc and one is dohc. What I have in my lude is JDM F22b that is 2.2l SOHC non vtec. Just the same as mine on the link

JDM Engine Corp Engine Details - Honda Accord JDM F22B SOHC Non Vtec Engine

EDIT: I know original post said h23a1 for interchangeable, but what if he have sohc f22b thinking some from h23a1 will fit? you know?

S-LudeDan · 09-14-2011, 05:34 AM

^ yeah, I figured cause he said interchangeable with H23A1, but you are right, you never know.

prelude si95 · 09-15-2011, 10:14 AM

ihave an f22b dohc with the stock prelude trans. i just dnt know how to get parts for it like its making a tapping sound,sa i need a set f lifters or somethin internal, would h23a1 parts work ?

deaflude · 09-15-2011, 10:27 PM

For the head and up, H23 will fit and for the block and down, F22 will fit. The only thing that will not fit dohc f22b from f22/h23 is timing belt. GSR timing belt will fit.

prelude si95 · 09-17-2011, 11:14 AM

Alright cool man thanks that helps a lot. And a grs timing belt it off an integra gsr correct?

deaflude · 09-17-2011, 07:59 PM

Quote:

Originally Posted by prelude si95

Alright cool man thanks that helps a lot. And a grs timing belt it off an integra gsr correct?

94-01 integra GSR.

llWHITEBOYll · 09-22-2011, 01:14 PM

sorry seen this post so i had to join to chime in

i just did a dohc f22b rebuild yea they are correct use h23 for parts head up

i used a 88 dodge caravan timing belt and i kept the original water pump cuz i couldnt figure out wich one to use

here is a great link for info
here

prelude si95 · 09-22-2011, 10:17 PM

Alright cool thanks for the help. Also when the motor gets warmed it up makes a ticking noise from the top end and at high rpms ill get an oil light any ideas on what it could be?