How do u change the corner bulbs do u have to take the whole headlight off again??
__________________
errorr: You're going to have to shrink the picture of your car that's in your signature. Somewhere around 150 pixels for the height should be good. If you need help on this let me know. Joon
u can reach it through the engine bay. The area is really tight, but try to grab the socket and turn it a bit and it'll slide right out.
__________________
-Z-
93 Prelude Si/VTEC 4WS [Status: Getting Ready]
JDM h22 Turbo Widebody Benz Conversion Lude
Quick Mod List: JDM H22 - Turbo - Widebody - Benz CLK Taillamps - Bi-Xenon Projectors in JDM Black Housing Headlamps
Quick Featured List: CES 2004: Redline Booth - SEMA 2004: Featured Vehicle for Lite Glow - CES 2005: Lite Glow Booth - SEMA 2005: Featured Vehicle for Digital Audio - CES 2006: Digital Audio Booth
Do you guys have the extensions that came with the JDM's?
I made sure that I got the extensions so that I could change the corner bulbs very easily. They are 3 inch grey pieces of plastic that slide over the corner bulb harnesses and stick out into the engine bay far enough to be able to get your hand on them and twist easily.
If you don't have them, I suggest you try to track them down because they are very convenient.
Originally posted by Mark94 Do you guys have the extensions that came with the JDM's?
I made sure that I got the extensions so that I could change the corner bulbs very easily. They are 3 inch grey pieces of plastic that slide over the corner bulb harnesses and stick out into the engine bay far enough to be able to get your hand on them and twist easily.
If you don't have them, I suggest you try to track them down because they are very convenient.
The extensions are standard equipment on the JDM Stanley lights. Without them, it is very hard to change the corner bulbs so Honda had to make some sort of extension.
The corner bulbs don't burn out often so if you don't have them it will probably be a while before you have to replace them, but I just wanted them just in case.
Exactly what Mark said. Originally I had stock lights that came with the JDMs. Then I changed the bulbs to hyperwhite and those extensions came in handy. No way in hell would I think of taking the headlamps off. They're staying on forever.
it is very easy to change the cornor bulbs, i just did mine last week. just take off the top of the window washer and then you might have to take off your intake (that is what i did for a better reach) and the you can do it easily. make sure when you put the bulb on, not to get too much oil on the bulb cuase it might POP (blow up or shatter).
Originally posted by ProjectPrelude Exactly what Mark said. Originally I had stock lights that came with the JDMs. Then I changed the bulbs to hyperwhite and those extensions came in handy. No way in hell would I think of taking the headlamps off. They're staying on forever.
AMEN!!! They ARE staying on forever.
__________________
Jason (AIM-->JDMSLICK96, or MSN IM-->JDMSLICK96)... For SALE: Recaro SRD Limited Edition seats, VTEC sub enclosure w/ Kicker 6x9 Free Air subwoofer (& free amp). PM w/ offers. Rest In Eternal Peace, Capt Derek Argel, Capt Jeremy Fresques, Pfc Chris Hill, & Sgt John House (all lost to Iraqi conflict).
Anybody want to buy my Lude? (Will sell in either stock or fairly modded trim).
The AutoGuide.com network consists of the largest network of enthusiast-owned enthusiast-operated automotive communities.
AutoGuide.com provides the latest car reviews, auto show coverage, new car prices, and automotive news. The AutoGuide network operates more than 100 automotive forums where our users consult peers for shopping information and advice, and share opinions as a community.
Linear Mode
