tokenAZNguy040

ok, so i got my clifford arrow 5 today and started installing it. i got 2 problems. first, i can't get my lights to flash when i arm/disarm the alarm. now with the arrow 5, you have a light flash INPUT and a light flash OUTPUT. i tried almost everything to get this to work but it's not working! any suggestions? second, problem, i can't find the wire for my trunk trigger. any clue where that might be? thanks a lot fellas! peace!

~T

__________________
'95 Honda Prelude(R.I.P. Dec 24, 2004)
'94 Acura NSX(weekend get-a-way) 12.7@113mph
'04 Kawasaki Ninja ZX-6R

Qveon

Ok for one you need your lights flash OUTput to go to a red/blk wire in the driver's kickpanel. Its going to be a little thicker then most wires in there. Just look for the harness coming from the steering column that goes behind some stuff and comes out over at the kick panel.

two...there is no power trunk release in a prelude. You need to get the accord power trunk popper or you need to get a universal one.

__________________

tokenAZNguy040

red/black by the drivers kick panel for the light flash OUTPUT..alright. see here's the thing BOTH the light flash INPUT and OUTPUT needs to be connected, but i'll just check the polarity of that red/black wire and go from there. BUT THANKS MAN!

second, i was talking about the truck trigger not actually popping it. you know what i'm talking about right?

oh btw, do you know which wire down by the kick panel is for the dome light by any chance? thanks man!

__________________
'95 Honda Prelude(R.I.P. Dec 24, 2004)
'94 Acura NSX(weekend get-a-way) 12.7@113mph
'04 Kawasaki Ninja ZX-6R