CrazyKid

ok we are almost done the swap... but we now have alittel problme, the fulel ine doesnt line up, it on the other side of the car, the motor is JDM and im owndering if the fuel rail of my H23 will fit onto the H22 and work, then the fuel lines would match up.

fast help would be appreciated

thanks

Bill

__________________
the answer is ... more power

Crate

again, im gonna send you over to www.accordclub.com. Only because i used to have an accord, and there are TONS more ppl that have h22 swaps in the accords over there.
And in the prelude section, there is a complete writeup on h23 to h22 swap.. print it out. its like a 4 page paper, guy wrote down EVERYTHING he encountered while swapping, down to the nut.


good luck.

And if i remember from reading about it, there is a fix for that.

__________________

jdm h22 - 180.3whp 151.4lbs/ft

JDMPower

yes the h23a1 fuel rail will fit. Just make sure you use your JDM injectors though. I swapped out my fuel rail for the same reason, it was on the other side as opposed to the USDMs.

__________________
92 honda prelude w/JDM h22a

CrazyKid

thanks guys... i found that artical.. it was great help.. now we are jsut leftt o the wiring to figure out.. thats all..

__________________
the answer is ... more power