lude000

I was wondering if it is possible to wire up the mirrors so that they fold in when you arm your alarm and fold out when you disarm it? I would think it would only be a couple of wires, but then again I'm no expert at this stuff. If anyone knows if/how this can be done, could you please share? Thanks.

 

preludestud11

yes it is possible. You just have to hook one wire up. The wire that pulsses when you arm and pulses when you disarm. I beleive it was catz that had it done on his car.

__________________

Lucke

Its Caz, and yes its very easily done. as said above

__________________
R.I.P. Jonathon "Jape" King
Brian H.

Qveon

Yes it can i am going to do that on my JDM car accept mine will open when you turn the car on and close when you shut it off.

BUT i will do a write up for both. When do you need to know how to odo this?

__________________

neldogg

sweet! that way you wouldnt have to get the special mirror switch huh?

lude000

I'm in no big hurry, whenever I get the info I will do it. A write up would be great, seeing as how there isn't even one FAQ'd or anything. I'm sure it won't be that hard like everybody else is saying, but I didn't install my alarm, so I just have to figure out which wire to tap.

Qveon

most likely

__________________

tothextre1773

can you do the write up soon? im gonna be installing my mirrors within the next couple of weeks.....thanks

Qveon

probably no...i cannot tear apart my door and put it back together just for a write up, then tear it apart again to hook up the alarm and put it back together.

when i take the door panel off i am doing everything at once. Window kit, speakers, mirror setup

it may take 2-4 weeks before i get to this. i need to get new bumpers and the paint done first. then i can put the alarm in and do all this.

__________________