My snowboard does NOT fit through the pass through

its too wide with the bindings, though I do have a wider then normal board.
Your best bet is in the back seat.
1. Slide the passenger seat all the way forward, fold forward.
2. Put snowboard into car so that the tail of the board, bottom side up (bindings down), is resting on the rear drivers side speaker grill on the package tray.
3. Put the nose of the board behind the passenger seat on the floor, slide the passenger seat back till it semi-holds the snowboard in place.
4. Buckle passenger side seatbelt into driverside seatbelt latch, tighten.