minilogoguy18

OK, I tried PMing another user that had done this but no response. What I have is a 93 Si that I did a El conversion and swapped the entire harness so I now no longer have the plug or wiring for the switch. I took the loom off of my old harness and the plug had 6 wires and after looking at pics I thought I had the right 3 but they don't work. So, what I'm trying to find out now is which wires off of my old harness are the ones I need. I don't have any sort of voltage meter or anything to test which wire is the power/switch/negative. I do know though which slots the wires go into on the switch end just not on the harness side. The 3 wires I took from the old 93 harness were the 3 that ran to the driver side plug where I believe the rest ran to the passenger side. ANY help is greatly appreciated, I may just take a paperclip to the main harness and try to jump it but I kinda ran outta daylight.