fog light cover measurements - Honda Prelude Forum

MidNiteMysT · 11-02-2003, 11:12 PM

it would be nice if someone could loan me just one fog light cover and i will send it back the same way i recieved it. i understand if no one would want to so instead, i ask if anyone would be able to take some specific measurements for me? like how big the hole is for the fog light, like the hole thats in back. maybe i can dremel it to fit my piaas. satan srv said 2 1/8 top to bottom and 2 3/8 side to side. i would like someone to give it a measure just to confirm.

yohan420 · 11-03-2003, 01:22 PM

I'll try and take an accurate measurement of my fog covers tonight for you ...

If possible I'll try and trace the outside of them onto a piece of apper and scan it into the computer to actual size w/ measurements...

The foglights are pretty big, I don't have them at home so can't measure them, I posted a while back about them though ... with the bracket it fills the whole palm of my hand so there is lots of room in the OEM location, but to make it look clean w/ bracket I dunno ... you could do a hack job and screw on like some gardening stuff like the home depot lip mod and cut out a hole, it could look ghetto but if you heat it up to bend and make it clean it may be ok ... or you can cut out the oem location, place your fogs and call it a day (shrug).

MidNiteMysT · 11-03-2003, 03:54 PM

Quote:

Originally posted by yohan420
I'll try and take an accurate measurement of my fog covers tonight for you ...

If possible I'll try and trace the outside of them onto a piece of apper and scan it into the computer to actual size w/ measurements...

The foglights are pretty big, I don't have them at home so can't measure them, I posted a while back about them though ... with the bracket it fills the whole palm of my hand so there is lots of room in the OEM location, but to make it look clean w/ bracket I dunno ... you could do a hack job and screw on like some gardening stuff like the home depot lip mod and cut out a hole, it could look ghetto but if you heat it up to bend and make it clean it may be ok ... or you can cut out the oem location, place your fogs and call it a day (shrug).

thanx. i think those fog light covers might fit my piaas perfect, if they dont, then i will try to find another way to mount it but until then, ill try and see if i can get my piaa fog light to fit in the oem fog light cover.

yohan420 · 11-03-2003, 10:02 PM

show a pic with guestimate dimensions of the PIAA .. I can try n eyeball it for you.

MidNiteMysT · 11-03-2003, 11:23 PM

Quote:

Originally posted by yohan420
show a pic with guestimate dimensions of the PIAA .. I can try n eyeball it for you.

i can do better then that. i can give you exact dimensions

http://www.piaa.com/Lamps/Lamp-pages/004xt.html

i have the 004x, i think the only difference is that mine is back and the xt is silver. dimensions are the same.

Satan_SRV · 11-05-2003, 10:51 PM

The cover itself is exactly 2 inches deep, and the hole is 1 inch deep in the inside edge, angled to to flush with the front on the outside.

MidNiteMysT · 11-06-2003, 06:39 AM

Quote:

Originally posted by Satan_SRV
The cover itself is exactly 2 inches deep, and the hole is 1 inch deep in the inside edge, angled to to flush with the front on the outside.

and the circle in the back is a oval. 2 1/8th inches top to bottom and 2 3/8th left to right. correct? where can i buy a set of fog light covers?

MidNiteMysT · 02-16-2004, 08:13 PM

i just need the ovals dimensions on the inside to see if it will fit my fog lights. im starting to consider just buying a fog light set of my own. does anyone have a pic of just the cover? if i see how its designed, then maybe i can replicate it and make it fit my piaas.