few questions on fogs - Honda Prelude Forum

XKALIE · 10-17-2005, 08:41 PM

Im looking at some yellow fogs, they don't include switch or garnishes. I found some garnishes at hondautomotiveparts.com. Garnishes are covers right? Also for the switch, do I need the factory switch or can I just use maybe some kind of toggle switch in the mean time? How would that wire up to the switch harness? I have searched this, couldn't find anything on here that told me where to get covers. Any info will help Thanks for everything

Lucke · 10-17-2005, 10:12 PM

sorry to be the bearer of bad news, but HAP.com does not have any parts at all for 4th gen fog lights as everything has been discontinued for years.

and about the switch, you can use any toggle switch you want, but you'll have to splice and solder the wires on yourself (assuming that you even have a relay for it).

good luck though.

XKALIE · 10-18-2005, 05:11 PM

Thanks for the reply you saved me alot with that info. Do the fogs look bad without covers?

Lucke · 10-18-2005, 05:30 PM

yeah, if you're going to buy fogs, but the complete set off ebay or buy the complete set from somebody on here.

altieribuilt · 06-01-2006, 12:53 PM

or you can splice em to headlights, and just have power from headlights and ground em to chasis, and have em worrk that way too its gettin harder and harder to find the switch and relay,

slipknot95758 · 06-01-2006, 05:46 PM

i have a compelt fog kit minus the swith brand new in box. they are usdm fogs so clear lenses but i have garnishes in the wraper the relay braket everything un opened

it is the last kit left in the world NIB. i work at honda did a parts search that looks at every dealership in usa, and found a dealership in va that had one. i bought it just for the switch.

if you iterested pm me.

chester · 06-01-2006, 05:52 PM

So technically, it's the last one left in the USA NIB. There could be one in Europe or Japan.

Does Honda still produce the switches?

slipknot95758 · 06-01-2006, 06:39 PM

nope i called and told them i would buy 20 of them if the started to make them again(they remade pistons for my dad when they had run out of them) but they said that they would never remake a part for an acesory. my manager for my parts department is the one who called.

technacly yes but there is no way in america to check theirs unless you whant to stat callin dealerships over sea at random lookin for them.

aneurysm · 06-02-2006, 08:38 AM

don't be ghetto - find the OEM switch...

-brad

slipknot95758 · 06-04-2006, 02:35 AM

hey geto works till you get one.

i had a jumper wire in there till i got my oem and was working on making the togle switch out of a 3rd gen prelude fit in one of my blanks. i have like 6 of them layin aorund.