Did the climate control soldering fix..worked, but now probs - Honda Prelude Forum

decreasingbrand · 08-19-2011, 03:44 PM

Ok, I have a 92 Honda Prelude SI. As mentioned, I did the climate control fix by doing some re-soldering on the cc circuit board. It worked and now the air blows cool, buttons light up, and it vents in every directional mode I choose. Next, I put it all back together with the exception of the air mix control wire. I know it goes to the temp switch on the climate control, but I don't know how to hook it back up in working order.

Another issue that occurred after the install, my stereo nor my cigarette light work. Yesterday, after I got everything together again my car lost all of it's battery charge...car wouldn't start. So i got it jumped, and now it hasn't had any "not starting issues". The problem that remains is the stereo nor the cigarette lighter work. Any help whatsoever will be much appreciated! Such as how to properly re-install the air mix control cable and what possible reason the stereo and cigarette light would not be working. By the way, all other interior lights work.

WhitenBlack94 · 08-24-2011, 10:21 PM

Did you check your radio fuse? I am about to do the fix as well i will let you know if i hit any issues.

Let me know if you fix it

decreasingbrand · 09-11-2011, 01:48 PM

it was the back up light fuse I believe in the kick panel fuse box. I overlooked it initially because the fuse looked new, but I checked it with a multi-meter...the fuse was bad. It's all good now. Good luck on the fix. It wasn't bad.. the only frustrating part was taking apart everything and getting the cc board out. Also, I didn't hook the thermostat cable back up. I wasn't sure how to.. (should have made sure I took notes on how I took it apart). So, my air works great but when I push the thermostat slider to heat..It doesn't get warm whatsoever.

BlueLudeSI94 · 09-11-2011, 03:30 PM

Yeah, my slider is busted. The part where the cord is hooked in to a metal bracket with rubber to tension the line and change temp.
Does anyone know how to fix that??
I don't give a **** about the lights working... but I at least need heat. Im getting no heat or cold and the Tempurature slider moves only half way accross