Vtec Beast

I last week mot my 2.2 si vtec prelude the brakes past but they just didnt feel right the pedal kept sinking so i have replaced the master cylinder and the brake pedal now doesnt sink but it still seems to stop low down. It doesnt have abs could this be that it is supposed to have abs and someone has removed it as everything on it seems to have been set up for street racing?

rayslude

sounds like you need to bleed them more...

__________________

petern101

Also ABS is independant of the regular brake system. You should still be able to brake w/o ABS.

Did you bench bleed the BMC?

__________________

"I am a ricer because I have Z3 fenders"
Bless Her Heart ORG

lovemylude95

Mine did the same thing when I first bought over a month ago. After commuting for a couple weeks of driving normally, the problem seems to have worked itself out for the most part...the system will slowly bleed itslef out, but it will never be as good as if you have them bled properly. The shop in town said it would between 40 and 70 dollars depending on how tough the bleeders are to get of which in my case are going to be really really difficult.

dustin95 Se

i bleeded mine today and its alot better what brake fluid did you put in it

Vtec Beast

The problem has now been sorted bleed the system again and also realised that some one had replaced the brake light switch and not adjusted it. Thanks for all your help. But now my passengers electric window motor has packed up if anyone has one?????