trudoggslude

have any of you had this problem. The brake lamp warning light will not go out once i push on the pedel. I replaced all the brake bulbs but still have this problem.

__________________
Your Kung Fu is not strong!

G_Loc

Mine is on most of the time and my bulbs are fine. meh. one of the downsides to owning an old car is that stuff starts acting funny, especially the electronics.

__________________

Taters

I had the same problem. What I found was that even though I didn't have a third brake lamp in top or rear window I still had two bulbs, one of which had blown!

The bulbs can be found by removing the headlining trim between the sunroof and rear window .

Replace the bulb(s) and everything should be fine.

Hope this helps

tastyratz

i have that problem, of course its because i replaced it with 1157 led bulbs :P

__________________
2000 prelude base i/h/fly
90 240sx ka-t
95 240sx ka-t
love my toys

dilligaph

lots of times people are replacing the wrong bulb. when you look it up in the book at the store, it tells you what kind of bulb to buy but its for the wrong one... the brake bulb that you are more than likely having problems with is a dual filament one, not the top one....

__________________
1936 Chevrolet 2-dr Sedan - 1949 Chevrolet Deluxe-Cab Pickup - 1967 Chevrolet Camaro - and a few other less important vehicles...

G_Loc

in my case, they are all fine, just the damn light turns on anyways

__________________

trudoggslude

so what is the right bulb. That is to say what # is it?

__________________
Your Kung Fu is not strong!

MR.CLIFFORD

Looks like honda lists it as a 12V21CP


it's # 26

Click me

__________________

QWITCHERBICHEN

trudoggslude

thanks i'll see if this works

__________________
Your Kung Fu is not strong!