JonathanJ.

The problem: when the car is at a standstill, with the engine ON, the pedal bottoms out when pushed fairly hard.

Car: 92 Prelude S non-ABS

Work I´ve done:

• Replaced the MC twice (thinking first re-manunfactured unit was bad
• Replaced all brake fluid with new Dot 3
• Bled according to factory manual THREE TIMES, with letting the car sit overnight before bleeding the last time
• Did NOT adjust booster push-rod

The good:

• Brakes work good enough to lock up all four tires
• With engine OFF pedal throw and stifness is very good with NO mushiness
• no air bubbles showed-up during last two bleed attempts

What could this be? Brake booster push-rod adjustment (is still factory set)? Air in the system? Incorrect pedal adjustment (checked and is only about 2mm off)?

I will drive the car for the next few days and then re-bleed. Any other ideas?

Rhunes29

Im interested to see what advice you get. My '92 Prelude Si ABS has the exact same problem. I am puzzled.

zsudz922

are you leaking fluid at all?

__________________
FOR SALE: 2 EXCELLENT condition 1/8 scale Nitro R/C 4WD Buggies with TONS of extras!! comes with original boxes ect.. also have an EXCELLENT condition PS2 system with network adapter and MORE! comes with original box and manuals. PM me if interested!

JonathanJ.

What all have you tried?

Not a drop.

After driving around for a couple weeks, it is still with the same problem