Big Mouth front turn signals - Honda Prelude Forum

96whitelude · 09-16-2003, 03:57 PM

I never hooked up the turn signals that came with my big mouth bumper, and now I need to so I can pass texas inspection. Does anyone know where I can find instructions on how to hook em up? I know the WW site has instructions on how to install their stuff but for some reason I can't open .pdf files so I can't see if they help me or not.

Thanks,
Jose

L-U-R-C-H · 09-16-2003, 04:17 PM

Download Adobe Acrobat Reader. Found here:

http://www.adobe.com/products/acrobat/readermain.html

96whitelude · 09-16-2003, 06:18 PM

I just downloaded it like a week ago. Before that I had a really old version so I figured might as well upgrade, and when I did, it stopped working.

PRelude787 · 09-16-2003, 08:31 PM

Just do a clean install of it. Completely remove it from your system....then reinstall it. All the help I can offer without getting too technical.

concLude · 09-16-2003, 10:28 PM

just wire up your parking lights in your headlights to blink, and toss a yellow bulb in there, like meeeeeeeeee

96whitelude · 09-17-2003, 03:54 PM

Quote:

Originally posted by concLude
just wire up your parking lights in your headlights to blink, and toss a yellow bulb in there, like meeeeeeeeee

How do you do this? I'm probably gonna do this over the weekend, and I don't want my dad to be *****in about me not knowing what I'm doing

Thanks.

B|OhAzA|2D · 09-17-2003, 08:38 PM

1)Piggy back off the 12v wire of your turn signals
2)You will have to cut the parking light 12v wire
3)Put a connector on the harness side (You do not want that to ever have opportunity to ground out on metal when park lights are turned on)
4)Connect the bulb side wire of your parking light to the piggy back of your 12v turn signal wire.

Either do this with butt connectors, or if you have access to a soldering iron and heat shrink that would be the best way.

Someone else would have to tell you the colors of the wires or you can use a volt meter and find which wires are the 12v positive

concLude · 09-19-2003, 06:53 PM

just lengthen the wire from the blinker up to the parking light in the headlight. By blinker, i mean the one that when your lights are on, it is illuminated, and when you turn on the blinker it blinks, its the ones toward the outside of the car.

i used but end connectors and speaker wire and electrical tape, took a total of an hour max. goodluck