Adjusting JDM One Pieces... - Honda Prelude Forum

TruNinja619 · 05-20-2006, 01:56 AM

I got this from Honda-Tech...

http://honda-tech.com/zeropost?cmd=reply&id=21707911

Quote:

Originally Posted by wstef

I took this from an european documentation, the way of adjusting the JDM headlamps is exactly the same as european ones.

The only difference between them is that european ones are two piece but still with JDM design and look.

The KG model shown in the middle of right column does not apply as it is a special version with an electrical leveling system.

A and C make up-down adjustement

I hope its not a repost.. I didn't see this on the FAQ page too.. so yea..

petern101 · 05-20-2006, 01:25 PM

it would be good to faq. i posted in that thread.

i figure most of us smart po ppl could probably figure this out

heheheh

evolvedbb2 · 07-02-2006, 11:31 AM

sorry to bring back from dead but which way does each of those adjust?

Dongoesby · 07-02-2006, 12:20 PM

I done it, but the points ABCD it suggests there seems wrong. I went through a hard time

petern101 · 07-03-2006, 04:04 PM

ok basically just look from the top down to the headlights. you will see 8 cogs, 2 per each bulb. take a long phillips number 2 head screwdriver and point the headlights (on of course) to a blank wall.

turn and you will easily find out which way it adjusts. one will adjust down/up and the other left/right

simple as that