chris112818

well after a long day with a socket set and two floor jacks one honda prelude 2001 base i finally got my clutch and rear main seal replaced... now i have this i cant figure out what its going to or remember what it is ill get more pictures if these are not good enough thanks for any help (I have searched my helms to no prevail ) im thinking either it goes to my passenger side front abs sensor since my light came on after i got the job done or maybe it went to my vacuum tank that i havent had since ive owned the car ive only seen that in my manual???

its most definitely the one thats not plugged in...

This should probably be connected to something ehh?

chris112818

Errrm... the pictures arnt showing up on my mac so ill post the pics url's also im probably doing something wrong...

Imageshack - img0498d.jpg
Imageshack - img0497ke.jpg

lilredlude

the gray one? its near the air filter? or closer to the cabin?

__________________
If you don't know what you want, you end up with a lot you don't.

chris112818

yes the grey one i pulled it up to show it was disconnected

lilredlude

so its under the intake filter? i have no idea where it goes, but if someone doesn't know tonight i'll go look at my car tomorrow when its day light

__________________
If you don't know what you want, you end up with a lot you don't.

chris112818

yes its under the intake i looked to double check well just under the round part of it not the box or anything i tried to trace the wires but they are wrapped up and i cant tell which wire goes where Also thanks for the help

lilredlude

its not plugged into anything on mine. (I run fine, no cel's)

__________________
If you don't know what you want, you end up with a lot you don't.

chris112818

hmm crap must be vacuum tank long night of troubleshooting abs thanks for the help