Type S intake... - Honda Prelude Forum

KManZ · 11-09-2006, 01:05 PM

Check it out... in my quest to return my Prelude to stock-ish (OEM) form, all I need to do is purchase an intake, either stock SH or the Type S intake. I am wanting the Type S at the moment.

The kid I bought this car from put an AEM intake on. He did NOT supply me with the stock intake system. That being said, if I order the Type S intake, will it come with all the necessary parts for me to take out the AEM and install the new one?

upr0ar · 11-09-2006, 01:07 PM

I dont see why not. Contact jdmland.com and see if they have any in stock.

Email: help@icbmotorsport.com | Phone: 480-626-1927

lilredlude · 11-09-2006, 01:10 PM

no, you need a piece from the stock in order for it to work. the bottom piece that goes by the battery. the type s is only the top half

KManZ · 11-09-2006, 01:27 PM

What about the "side branch" tube shown in the hondaautomotive parts page? Part #12?

http://www.hondaautomotiveparts.com/...y5=AIR+CLEANER

Actually, what parts from this diagram do I need to fit the Type S intake?

This is so frustrating. Whats so tough about holding on to stock parts

lilredlude · 11-09-2006, 01:33 PM

no to 12.

need #9 for sure
#3 and all that crap around #22 bolt 9 down

i think #27 - but its the hose that goes from your aem to that port on that valve cover, might be able to work something out with the aem one

redtop22 · 11-19-2006, 04:43 PM

You will also need parts #4 and #6. They are the clamps that hold the chamber closed.

Also, need #13 x2 and also #10 x2.

You will need #10 to secure the elbow that connects the filter chamber to the dynamic chamber