Kosakamaka

This may sound like a dumb question, but I need to ask it anyway. I was wondering if it is possible to use different sections of two exhaust systems. Both of these would be designed for the Prelude of course. I currently have a aftermarket system that is designed for my SH prelude. What I would want to do is buy a base exhaust and attach it like an axle back. This would require the bolting bracket and length to be the same for both. I was unsure if there is a standard for the type of bolting bracket and length for that section of the exhaust. I only ask because I could get the exhaust for a good deal. Thanks for the help and sorry to sound like a rambling idiot.

lilredlude

base and sh are different sizes, you might have to have it cut or have an adapter made. forgot which way it is.

__________________
If you don't know what you want, you end up with a lot you don't.

Kosakamaka

Yea, the overall length of the SH is lower. But I was curious if the axle back section of the two is the same length, and the flanges are the same.

lilredlude

i believe the axle back is the same. i used a base on my sh. flanges would be the same. us vs jdm are different depending on the section

__________________
If you don't know what you want, you end up with a lot you don't.