agent02

my eboch springs are too low and are eating my tires up and i cant afford ground controls right now so i decided to buy some oem springs to go with the koni yellows i have on there. i got the springs in used but the problem is i cant tell which are front and which are rear. they are both the same height and diameter but two are just a tiny bit heavier and thicker. do the thicker ones go in front or rear? pls help, im really anxious to install them. thanks in advance

PreludeNmphs

I have a set of OEMs off the car that i can check later and will post back.

__________________
2001 Pearl White Prelude (base)
SS Auto (rebuilt @ 166k)
Currently 193k+ miles

Build:
http://www.preludeonline.com/f82/pea...simple-268516/

PreludeNmphs

Ok I took a pic of my OEMs. My rears are longer than the front mounted. Not sure this will help you. BTW these are from a base model.

Front = Left
Rear = Right

__________________
2001 Pearl White Prelude (base)
SS Auto (rebuilt @ 166k)
Currently 193k+ miles

Build:
http://www.preludeonline.com/f82/pea...simple-268516/