MSD Blaster Coil 3 installation - Honda Prelude Forum

darklude · 03-02-2002, 10:26 PM

i have a 5th gen lude.
the msd blaster coil 3 comes with a positive(+), negative(-), and the tower. and my stock coil has 3 wires and the plug that goes to the tower.
which wire is positive and negative? yellow wire, yellow w/ black wire or green wire? and what is the third wire?

i hope i wrote this so no one is confused...

darklude · 03-02-2002, 11:24 PM

help please

Quaalude · 03-03-2002, 12:07 AM

black/yellow and yellow is positive and green wire is negative....if u have a MSD, the green wire is hooked up to the white wire and is used to trigger the MSD unit...tells it when to spark

darklude · 03-03-2002, 12:14 AM

Quote:

Originally posted by Quaalude
black/yellow and yellow is positive and green wire is negative....if u have a MSD, the green wire is hooked up to the white wire and is used to trigger the MSD unit...tells it when to spark

so which yellow one should i connect to the positive?

Quaalude · 03-03-2002, 12:20 AM

both-black/yellow comes from the IG1 and the yellow Y off this wire and powers the ICM....when i hooked up the msd, i connect both black/yellow and yellow wires to the small red wire on the msd and the green to white...check Dirtylude's site for info on his install as it will be easier to see www.hondaprelude.to

darklude · 03-03-2002, 03:58 AM

ok i guess i'll just wait til my jacobs gets here before i install the msd blaster coil