Originally Posted by NVSRIDE

Ive searched and only found links and info showing how to install the Blaster 2 coil with a MSD box. I need to know the wiring instructions with just the Blaster 2 coil and stock ignition.

Originally Posted by OHPOChris

Is this really what passes for help around here???

You unplug your stock ignition coil and remove it, you will notice on the harness you just unplugged that there are 3 wires running into it. One is Black and Yellow, one is Yellow and one is Green. You'll need to use 3 female speaker connectors to extend the wires from the harness tp your Blaster Coil. Once you have done this, you connect the yellow and yellow and black wires to the positive terminal on the MSD Blaster and the Green to the negative. This will allow it to function just like your stock coil. I hope this help, i had this set-up for like 3 years and never fried an ECU.