|
Little help here with car not starting...already searched
Ok so today I cleaned the egr, installed new fuel pump, cleaned distributor cap and rotor, tested the ignition control module at autozone and it was good, noticed that the wires for the distributor were frayed so i cleaned them up and taped them, cleaned distributor and tried to take it apart but couldn't really take the wires out so reassembled it. I tested the wire leads like the repair manual states and all was good. I have spark and there is fuel getting to the rail, what am I missing?? Could it be that the distributor is fried now? Could that cylinder position sensor inside the distributor be the problem? Any help is welcomed. Thanks.
__________________
|