Koni Yellow/GC Combo - Page 2 - Honda Prelude Forum

Wsteun · 10-26-2006, 10:25 AM

From what I saw, he had the locking nuts in a bag, the white washer things that sit ontop of the shock body. I don't think I saw any other washers though. or rubber bushings? I knew I should've taken a picture, it slipped my mind.

Can you link me to the Koni Hardware kit?

ImagePree · 10-26-2006, 10:39 AM

Easiest way is to call Koni directly and ask for the hardware pack. They already have these packed and ready to go.

If you want to make sure if the seller has these, just take one of the nuts and try it on your shock. It should be too big and will not tighten down.

petern101 · 10-26-2006, 10:40 AM

^just go to the koni-na.com website.

look on accessories

Wsteun · 10-26-2006, 10:51 AM

This is the complete upper mounting hardware for all 8041, and 8010 Series Honda and Acura applications.(Prelude and S2000 Requires additional washer listed on this page).
size: one kit per pair of shocks
price: $15.79
in stock: no
Prelude rear and S2000 additional washer
This is to complete the hardware required for the Honda Prelude rear and Honda S2000 front and rear
size: One washer each shock
price: $9.69
in stock: yes

That?
http://www.koni-na.com/apparel.cfm?l...ubmit=Continue

petern101 · 10-26-2006, 11:01 AM

^yes. but looks like its outta stock.

hmm i was about to buy that as a spare set for my car. also need new bumpstops

Wsteun · 10-26-2006, 11:18 AM

I'll see if he can send me a couple of pictures within the next few days so I can post them up. I'm probably going to buy them.

paulyg · 10-26-2006, 12:23 PM

Quote:

Originally Posted by Wsteun

Prelude rear and S2000 additional washer
This is to complete the hardware required for the Honda Prelude rear and Honda S2000 front and rear
size: One washer each shock
price: $9.69
in stock: yes

I'm still not sure what this extra washer is and why you need it. they didn't have any in stock when I bought my mount kits so I didn't worry about it. Billy, do you know how this washer is used?

McLude · 10-26-2006, 01:16 PM

I've had this setup for 5 years. Paid WAY more than that. I love it. Go for it.

Wsteun · 10-27-2006, 10:37 AM

I posted pics.

paulyg · 10-29-2006, 11:43 AM

It looks like you are missing the washers and sleeve. You'll need to buy two of the kits from Koni. Still a good deal though.

Wsteun · 10-29-2006, 02:01 PM

Are the sleeves included in the hardware package? or should I go ahead and give them a call?

What exactly do I need, sorry to be such a pain in the ass. I just don't want to get these things and get screwed when I go to put them on.

71dsp · 10-29-2006, 08:48 PM

Damn, those are in good condition. Looks like he's missing the sleeves and washers. You'll need 4 sleeves and 8 washers. It still looks like a killer deal. I'd replace the front spring isolators as well, if you don't mind spending the money. And use good bumpstops if yours are trashed.

Buy them, and call Koni to order up the hardware kits (I think you'll need to sets). Call GC and order two spring isolators as well.

snotshake · 10-29-2006, 09:20 PM

Just as a comparison. I bought mine for $400 with 15k on them. I looked for about 3 months to find that deal. Jump on those.

Wsteun · 11-02-2006, 09:36 AM

K I just picked them up. Now I'm going to see about ordering the Koni Hardware within the next day or two. I can't wait.