nureulsaranghae

hi.... you all will say...

search!

i did search.

and i only found the installation photos of Reverse Indiglos.

i dont get the wiring part.

anyone got step to step photo installation instructions?

or any tips by words would help me a lot! thanks!

john.

99import

Arnt they just like 12volt , mine were just slide the gauges under the old ones, and plug,,or tap away i tap on the cigerte lighter,,it turns on with the car running,,

nureulsaranghae

it has 2 wirengs...1 red and 1 black. which connects to....the green or blue switch....where do i hook that up to and where do i hide that switch?

DJ Mugen

this is how i do it pull out ur dimmer box on the left side near ur moon-roof and your cruze control u look at the dimmer swich for a red wire with a black line. u tap into the wire with a wire splicer it will lii like this ( ===: :___ ) go to the store u will see how it will goes then for the ground wire there is a screw on the side u just unscrew it then strip some of the wireins off of the ground , wrap it around the screw then u screw it...

PS sorry for the messy writeing hehehe

__________________
Join AsianAvenue.com today

w0rdie

Good man!

Ludatic

u dont get teh wiring part? i'll try to explain a lil better then..
well in my write up this is wut i wrote:
"...there should be 4 wires that go to your dimmer switch harness, solid red, solid white, red with a black stripe, red with a white stripe. Strip the RED WIRE WITH A BLACK STRIPE, and tap into it with the RED wire from the inverter box that came with your indiglos."

If you don't understand this is what i mean. The red wire with a black stripe is connected to ur dimmer switch. U take a wire stripper, or a lil pair of scissors or army knife or whatever, and cut off a lil peice of rubber, so u expose the wire. Now you take the red wire from the inverter box (the thing that comes wiht ur indiglos), and u connect that to the exposed wire. The ground (black wire) that comes with the inverter box just goes to a ground source. I wrote it in the write up.. u just basically unscrew a bolt that's connected to a main body part, put the wire under it, and screw the bolt back onto it so it holds it (make sure the copper from the wire is touching the metal body.

__________________
The Trapezoid of Death is back.

PrElUdE88

the easiest way to do it is... connect the postive and negative wire to your parking lights.. when you turn on your lights its should come on...

__________________
get somthing you like and forget everyone else opinion !!!!!

cowboijeff

lets get the cookie jar, btw there is write up in the FAQ forum

__________________
- Jeff
AP2

Ludatic

yea that's the source of the dimmer switch place. the guy just doesn't understand how to splice wires, he needed more details that's why hehe

__________________
The Trapezoid of Death is back.