GC & KYB AGX - Honda Prelude Forum

vince22SH · 08-03-2006, 06:25 PM

Need help........Does anyone have a picture before installation (anything!!!?) finally got the rubber isolators my friend (mechanic) said its wrong parts(coilover and springs) but i already called GC before and compare it with other prelude GC and its the same .....also if someone have the installation intructions (if it came with it) please post or send me a copy. thanks

this is what i got

and these except mine s brand new and does this go on top of the springs?

is that all i need?

paulyg · 08-03-2006, 08:19 PM

I don't have the directions, but that is all you need. The red adapters slide over the shocks and rest on the spring perches. The black sleeves should be inside the adapters like they are in the pic. The rubber things go on top of the springs and the stock "top hats" go on top of the rubber things. The KYB AGXs should come with washers that go where the shock shaft changes diameter. They also come with two nuts for the top of each shock. The rest of the stock washers are re-used. You won't need the dust covers. Hope that helps.

vince22SH · 08-03-2006, 10:31 PM

thanks so much

i will explain it to him again,

vince22SH · 08-07-2006, 09:12 AM

well we finally got it done yesterday

thanks everyone

anyway still need few more adjustment also since i can re use my dust boot will my shocks be ok?

well heres a pic i wanna drop my front more but he said i cant and thats as low as it can go and we have to raise the rear a lil bit cuz it was lower than my front

we got done pretty late so hope we can get @ it today see if i can drop the front more

Pre Drop(Neuspeed):

w/ Ground control :

LUDE'Z · 08-07-2006, 07:07 PM

Looks good