Fog Light Lens Help - Honda Prelude Forum

SoleFreshNClean · 10-13-2011, 07:13 PM

I did the yellow capsule mod and I baked one of the lenses again because it wouldnt fit the foglight. After a while i took it out and ive noticed bubbles started occurring as well as some sort of haze to the lens. Can anyone tell me how to remove or fix this? I really dont want to buy another set. I baked the lens at 300

S-LudeDan · 10-13-2011, 09:04 PM

1. The oven temp should never exceed 200 and you should never keep it for more than 10-15 minutes in there. You baked it at very high Temp.

2. You baked it 2 times? a big no no. This puts stress on the plastic and the housing.

3. There is no way at all to remove the bubbles or the stress marks.

4. I am sorry mate.

SoleFreshNClean · 10-13-2011, 09:39 PM

Quote:

Originally Posted by S-LudeDan

1. The oven temp should never exceed 200 and you should never keep it for more than 10-15 minutes in there. You baked it at very high Temp.

2. You baked it 2 times? a big no no. This puts stress on the plastic and the housing.

3. There is no way at all to remove the bubbles or the stress marks.

4. I am sorry mate.

Yeah well there was a write up that said if the seal wouldnt come off heat it up again. So i baked it up again.

But thanks for the information bro. Im on the look out for a set of fogs

S-LudeDan · 10-13-2011, 11:57 PM

^ sorry, I meant to quote your post. Pressed the edit button by accident

. As you can see I didn't edit anything, I just deleted my response from your post.

this is what I wrote -

yeah, no problem. Hey, if the other fog light is still good, you can go ahead and sell it. There definitely will be someone looking for a replacement. You can probably get $50-75 for the one fog light.