luke_a192

I'm in the middle of a 5spd swap and I went with Fidanza for my fly wheel. Today I got it attached to the crank and it looks like there will be very little, if any clearance between it and the bell housing. I haven't jacked the transmission up to check it further yet but it looks sketchy.

Here's what it looks like towards the back of the block.





The flywheel's part number is 191221, I'm fairly certain it's the correct one for a prelude. Those of you who have or have had a Fidanza flywheel, do you also have very little clearance towards the back?

__________________
-=luke=-

Allude2Prelude9

Here is a pic of mine when I did my swap. I have the same flywheel. It looks close, but it doesn't do anything other than spin so it should be fine. I've had mine for over a year now as my DD and had no problems with it.

bouckarooo

it will be lcose but if you are not sure then measure the stocker flywheel and make sure they are the same diameter.

Allude2Prelude9

He's doing a swap so he probably doesn't have a stock flywheel to reference.

bouckarooo

yes silly me, had i looked at who it was i woudl have known.......hahaha

luke_a192

yep, it's me lol. well next free day I get I'll try ta get the trans close and see.

__________________
-=luke=-

bouckarooo

hey man after you egt teh trans on post up some pics would lvoe to check it all out

luke_a192

yes sir

__________________
-=luke=-