LudeBoi121

Alright guys, i'm in need of some help. I had a bad master cylinder, which i replaced. After replacement i ran into a leak trying to bleed the clutch line, having fluid pump out. After that was fixed i begin bleeding again. No leak at all but i am running into a problem where no fluid is coming out of the slave while bleeding the system. Also fluid on the clutch res does not go down either. Any help will be great. thanks

TruNinja619

Since I was bleeding the clutch master cylinders by myself, what I did was buy one of those bleeder kits like this:



- hooked the long piece of clear tube line from the bleeder hole on the clutch slave cylinder to nipple on cover of the cup
- hook the small tube at the bottom end of the nipple on the cover of the cup
- fill the cup 1/4 - 1/2 of brake fluid
- attach cup to the cover and put it down on the ground
- Use your hand and slowly pump the clutch pedal

may take 10, 20 or so pumps, but keep pumping untill you see clear brake fluid come out in a stream.

__________________

Created by MyFitnessPal.com - Free Weight Loss Tools