ROM-BB6

hey guys.... I bought a set of used JDM fogs recently... I checked that there's the swtich and all the harness.. so I paid the guy an took it home... damn... and I just spent the past 4 hours trying to install it.. and only minutes ago I realized that I don't have the 4 pin relay......

would this be the same 4-pin relay in the USDM fog light kit? Can I just go to Honda and ask for a 4 pin relay?

took me 2 hours to install the foggies from outside.. and took an hour break.. then an other 45 mins trying to pry out the switch case.. but I just can't do it...

can you guys give some pointers...? I can't push my flat head screwdriver deep at all... and the switch casing is just not moving....

97luder

Hey man, I havent installed any fogs yet, but I found a site that may help you out a little. Take a look at this and see if it helps you out any. PM me and et me know if it does. http://prelude.vtec.net/gen5/appearance/domestic/fogs/

ROM-BB6

Thanks man.. I already have the foglights installed... just that I'm down to the interiror wiring part... and I realized I have a missing part... which is the 4-pin relay... and I was just wondering if this is the same as the USDM one or not... so I can get one from the honda dealers...

and personally, I find the instruction in the Prelude FAQ more clear then the one from the URL above... lol.. it's just that the pictures from the URL works really well when you need a reference~

thx to the person who took the time and wrote out the instructions!