OHPOChris

I have a VARAD flashing LED that installs by hooking a red wire to a (Constant 12v), the black wire to a (Ground) and the yellow wire to (IGNITION: Ground When Off)
http://www.varad.com/v4/pdf/IM-LLAlarmLED.pdf

I suck at anything electrical, the wires i have to work with are about 36" long. Where and what wires should I tap into to install this thing. I had the same exact thing in my old Lude and it worked great but i had a good electrical guy do it. Any h.elp would be extremely appreciated!!! Thank You

indylude18

Where are you hoping to put the blinky light?

__________________


Bluetop H23a Vtec Swapped NHBP '99 Base

OHPOChris

on the top of the steering column.

Tee-Dot

Now I'll know it's fake.

__________________

indylude18

Most aftermarket radios already have a blinky light in them.

All the wires you need are behind the radio. Pull the radio, splice into the all the wires you need from there. It should be pretty easy to tuck the wiring up under the dash and inside the steering column. IIRC, 12v source is a yellow wire, ignition is blue w/ white stripe wire and you can just ground it wherever is handy.

__________________


Bluetop H23a Vtec Swapped NHBP '99 Base