NtPReLuDe

First off I just want to say that the parts are still installed and will be coming off around March 12th or so. Thats my spring break and when I'll have the time to work on the car. I will also be needing some stock parts so if there's something I have that you want and would like to trade your stock part + $ for let me know. I will need the stock parts before march 6th and will send out parts the following week.

Stock parts needed from 97+:

possibly stock short block, good running condition


Everything is located in Houston Tx, pictures will be taken by request (part may still be on car tho) Prices do not include shipping. Will entertain offers, although low ballers will be ignored.

Small ticket items I'm selling:
Philips blue vision plus H-1 bulbs, brand new in box -$30 shipped
JDM cup holder -$30
Tein HA's used ~20k miles no upper mounts -$600
Neuspeed front strut bar - (painted, graphite silver) -$65
Goodridge ss brake lines ~30k miles -$50
Fluidyne radiator ~30k miles Was damaged but fixed with devon aluminum putty (no leaks since about 9 months ago) - $220
Axxis progressive shift lamp -$65
Red stiched shift knob -$25
Action 2md clutch, high power clutch (didn't slip with 380whp), 6.5k miles - $325
Fidenza flywheel, 6.5K miles - $175

Bigger ticket items:
custom turbo kit - $2150
sfp manifold, custom turbo t3/60-1 (similar specs as a precision sc61 unit), tial 35mm wastegate (red) 12psi spring, Blitz LM front mount intercooler (hugh mofo!), custom 2.5 -> 3" downpipe, HKS ssq bov, all piping/ couplings/ clamps, autometer boost gauge, apexi turbo timer, greddy profec B boost controller with steering wheel remote switch
3" exhaust - custom made, Blitz nur-spec muffler, piping is crush bent- $325
Fuel management - $850
Hondata S200B, ODB1 harness, P28 ecu, precision 880cc injectors with clips and resistor box, GM 3-bar map sensor
Built H22 short block, 2.3L displacement - $1750
Golden eagle godzilla sleeves (good up to 60psi)
CP 9.0:1 compression 89mm (thus the 2.3L)
Eagle rods with upgraded bolts
All new honda bearings, water pump, oil pump, timing belt.....
Motor has ~6.5K miles on it as of today

things together;
turbo kit + exhaust - $2400
Turbo + fuel - $2700
turbo + fuel + exhaust - $2800
turbo + fuel + exhaust + block - $4200
turbo + fuel + exhaust + block + clutch + flywheel - $4450

FiLLuP

hey nelson, what condition are the teins in? (whenever you get them off)

__________________

NtPReLuDe

there's nothing wrong with them, but there is a little bit of rust up top where you adjust the stiffness. I haven't really looked at them for cosmetic blemishes so I'll have to get back to you on that one. So I would say in good working condition. Whats your e-mail? I can sent you the pics of the rust I'm talking about.

FiLLuP

filluplee@gmail.com

thanks.

__________________

luder4life

hey i got stock clutch and flywheel sitting in my garage and the mechanic told me that i changed my clutch too early so it has use left in it. Let me know if you are interested

__________________

alvanderp

Nelson...your car is an SH right? I was gonna say, I have my stock header w/ cat if you want it, but its for a base.

__________________

Mojo85

do you have the CF trim? If so, I got dibs and give me a pm, what kind of knob is the red stiched one? any pics?

mdpc20653

pm'ed

NtPReLuDe

added philips bulbs and jdm cup holder

mrbang

dibs on the cup holder. i'm in houston too. maybe we can use felipe as our courier bish. hahaha

__________________

NtPReLuDe

that would work

mrbang

i'll have the money for ya friday night or saturday night if that's cool.

__________________

Rick Bailey

let me know if your willing to part out any motor/turbo parts

__________________
It's all about the speed