Massive part out, entire vehicle, JDM motor/trans, mugen, stock and aftermarket. - Honda Prelude Forum

EX99 · 08-08-2010, 11:31 AM

***car has been junked, if it's not listed I don't have it ***

So my prelude that I loved and cared for for nearly 6 years was totalled on July 30th by a girl that had gotten her lisence on July 11th 12 hours and 22 minutes later I was rear ended in my girlfriends car by a girl that was txting. So unfortunately now I have to part out both my prelude and RX7. Insurance offered me 3k for my car, which sucks considering my motor/trans is worth that. I managed to get 2,550 and keep my car to part out. So here is a list of things I have for sale. Some I have pictures for some I don't but will as soon as I have time or if requested. EVERYTHING you can think of on the prelude is for sale. I don't have internet yet in my new place so please bear with me as I'll only be able to log on on the weekends. You can call/txt me at 630-918-4939. I'll do my best to answer you but I do work 50-60 hours on average. I have no time so i'm not going to bother listing prices now, somethings I have prices in mind I won't go lower than I feel I should get, but everything is up for reasonable offers. Just please don't insult me with rediculously low offers. Here we go:

Before

After

Mugen Showa suspension - $750 pictures to come
Mugen twin loop - $750 pictures to come
Mugen rear valences *brand new* $850

Type-S front lip, painted crystal metallic blue - $275

Type-S fog lights

Simpson Reclined 5 point restraint system for 1 seat - $50 Pictures to come

Sparco red/yellow 4 point for both seats pictures to come
Sparco roll bar pictures to come
10 JDM blue honda oil filters, and 1 Hamp oil filter - $150
Knock off mugen seats - $200
OEM seat belts both sides front/rear -
OEM seats
Seibon carbon fiber trunk lid, faded and starting to crack on corners by rear glass. SOLD

Generic short ram intake $20

4 polished rota J-mags 15x7 fit's 4th gens $400

Type-s front strut bar - $75
205/50R15 G-force TA drag radials *brand new*
BFgoodrich traction TA 205/50R16 tires mounted on type-SH rims
Continental Contisport Contact - 215/40ZR16 little tread $50
Hoosier R6 225/45ZR15
Hawk pads
ATTS unit
JDM front bumper supports -$100

Way more to come, just need to think because my head is still all over the place and I have all my parts in 3 different locations. Please help me out and buy my stuff! Pictures will be up as soon as I can.

4bangincivic · 08-08-2010, 12:13 PM

How much for the Showa picked up?

Fresh_Prelude · 08-08-2010, 02:08 PM

how much for the mugen twin loop shipped to 85748? and if have any pics i'd be interested to see em.

indylude18 · 08-08-2010, 02:43 PM

Interested in the seibon hood. Condition? Price? Location?

If you don't post prices, your thread will probably get locked. It's in da rulez. Just a heads up.

EX99 · 08-08-2010, 04:15 PM

I posted price's on some of things, shipping not included in asking price. Everything that has been asked about I will get pictures as soon as possible. The showa suspension and mugen twin loop is still on the car, so the earliest I can have pictures will be next weekend.

bmxfreak415boy · 08-08-2010, 04:27 PM

u got pics bro? pm me

wutdephuk · 08-08-2010, 04:46 PM

pics of the rotas? how much without tires?

EX99 · 08-08-2010, 04:58 PM

bmxfreak what do you want pictures of? wutdephuk, the rear rims are in great condition, however the front two have some damage. One has a lot of scuffs on it from the impact of the car and the other has some curb rash on approx 50% of the rim from the guardrail. I would perfer to sell them with tires otherwise I have to pay to have them removed. If you just wanted the 2 good ones i'll give them to you for $200, if you want all 4 i'll do it for $275 since the damage isn't too bad just nothing you'd want to show off. If you want them all with tires i'll do it for $500, you'll need to replace 1 of the tires since my fender chewed it up but the other 3 have plenty of tire left. These tires are awesome in the summer, I believe they were around $200 new. Please call or txt since after tonight I won't have internet access until Tuesday.

EX99 · 08-08-2010, 05:00 PM

I'm trying to get pictures up but i'm having some problems, I don't have much time to do this and i'm struggling to learn how to use my girlfriends mac. Pictures will be up ASAP, let me know what you guys want pics of and I will make them a priority. Hopefully I can have this thread filled with prices, pictures and in an orderly manner by Tuesday.

chuitron · 08-08-2010, 05:32 PM

Sorry to hear about your prelude and your RX7. Good luck with your sale.

indylude18 · 08-08-2010, 05:44 PM

Pic of the seibon hood please.

GldCrzy · 08-09-2010, 02:28 AM

pics of the cf trunk?

just email it to me dulucky@mchsi.com

could i also get shipping qoutes on it to 50321 in des moines ia and also t5z3m9 edmonton ab canada

luke_a192 · 08-09-2010, 09:38 AM

Any chance the passenger side fender is still in good shape?

EX99 · 08-10-2010, 03:29 PM

Quote:

Originally Posted by luke_a192

Any chance the passenger side fender is still in good shape?

Both fenders are ruined, sorry.

EX99 · 08-10-2010, 03:31 PM

Quote:

Originally Posted by GldCrzy

pics of the cf trunk?

just email it to me dulucky@mchsi.com

could i also get shipping qoutes on it to 50321 in des moines ia and also t5z3m9 edmonton ab canada

Putting pictures up now, i'll try to get a quote as soon as I can. Keep in mind, shipping will not be cheap on an item of this size, even though it is extremely light.

97VTEC_SH · 08-11-2010, 06:18 PM

i want hood =). i wish i wudnt have just bought freakin lipkit =(...maybe u will still have it soon.

EX99 · 08-11-2010, 07:27 PM

Hood, type-sh wing, and type-s lip are all pending sale at the moment.

Houseostyle · 08-11-2010, 08:53 PM

Your car is worth more than 3Gs thats a bummer stinking insurance companies... sorry to hear man.

Here is a list of stuff I need for my lude if you are selling price please:
I need driver & passenger molding on doors that get all fungicied on the outside
The factory security system control unit.

GldCrzy · 08-12-2010, 02:15 AM

Quote:

Originally Posted by EX99

Putting pictures up now, i'll try to get a quote as soon as I can. Keep in mind, shipping will not be cheap on an item of this size, even though it is extremely light.

i know. thats why i gave you two postal (zip codes)

inextricable · 08-15-2010, 08:50 PM

Would you be willing to part with just the ATTS lft and rt oil pressure sensors?