Hello I've just become a new member here. I own a 55 plate civic type R limited edition and I need some help with a wiring problem if anyone can help.
I have got a buddyclub O2 sensor simulator and diagram reads as follows;
yellow 12V/VTEC?SC Relay
White O2 Sensor signal
Green Ground
Black Ground
On the cat convertor the wires are black and grey and 2 white ones. From the ecu the grey should be (I believe) the 12 v live and the black should be the ground. The 2 white wires only 1 would be needed.
I am stuck on which white wire will be the one to wire into the simulator. If anybody has done this or can help I would really appreciate any info.
Thanks
Linear Mode
