devtec

Gerhard,

Would you mind posting what color wires on the Bosch sensors go with what wires on the stock wiring? I'd really appreciate it.

thanks,
dev

__________________
Check out my for sale thread.

Gerhard

Bad front hub bearings.

I recommend that you just replace both of them at the same time.

I'd also just replace the hubs too.

Gerhard

Don't remember... but I can tell you that the sheet that came with the sensor was correct.

obrigado

I can't get the wheel to move along any non-steering axis, (doesn't feel like there was any play at all in the bearings) is the problem so subtle that it isn't revealed by the usual grab and yank suspension test?

You mentioned a ball joint as well, which one, and was it showing any simptoms?

Thanks Gerhard, this has been driving me up the walls for ages!

__________________

ellerton engrish: "twisties are just as danger"

Gerhard

I suspect the ball joint needs to be replaced... but it's not the cause of the noise.

Also, neither of my wheels oul dbe moved by hand either. It's just not an effective test.

I figured it out because I had the classic symptom of warped rotors... but the rotors were fine.

Prelude UK

Sounds tempting. I might give it a go. UK Ludes just have one O2 sensor.

__________________

29/05/2005 - Forever:
2000 Honda Prelude 2.2 VTi (H22A8 / BB8).

07/07/2001 - 22/01/2005:
1997 Honda Prelude 2.2 VTi (H22A5 / BB8).

28/08/1999 - 07/07/2001:
1992 Citroen ZX Volcane 2.0.

??/05/1999 - 28/09/1999:
1984 Ford Fiesta Poplar 1.0.

www.CARRisma.co.uk

michaelf786

does anyone know what is the part number for the OEM factory NTK unit? and where i can get it? besides getting shafted @ the dealer for $297?