Question about cylinder walls on H22A4 - Honda Prelude Forum

importrcr00 · 02-24-2010, 07:15 PM

In this pic you can see that cylinder 2 and 3 have that dark gray look. Cylinders 1 and 4 are both just silver. They are all shiny and smooth with no spots that are rough or catch a finger nail. Are cylinders 2&3 ok?

I just want to make sure that the block is good for a rebuild. Thanks.

chris112818 · 02-25-2010, 02:44 PM

refer to your helms i believe this goes into detail in how to check every nook and cranny ill double check real fast though yea its on 7-17 if you complete this with good results im sure its good for a rebuild... if you dont have a helms....meh search the forums or google there is plenty of places to download from

bouckarooo · 02-25-2010, 05:12 PM

well the block is still good, but you may want to rehone your cylinder walls or resleeve, dependign on what you are building.

pIERCE · 02-25-2010, 10:50 PM

Actually, the helms doesn't go into great detail whatsoever. The entire block re-honing process, as complicated as it is, is covered on a single ****ing page.

I can't believe how such a troublesome process is summed up in such a short amount of information.

It isn't detailed whatsoever.....at least not to somebody who hasn't done an FRM'd block.