interest in z10 radius arms for the prelude? - Honda Prelude Forum

SilverLudeSi · 03-01-2002, 09:29 PM

Would anyone be interested in getting z10 radius arms for their prelude. Someone on hp.com contacted z10 and they said that if they had around 50 buyers, then they would make them. If you don't know about these, they are supposed to eliminate wheel hop and improve starts. A lot of the tegs and civics are running them with good results. This would be especially helpful for high hp FI apps. Search on this board if you want more info or check out www.z10eng.com. These are completely suitable for road race applications as well.

DirtyLude · 03-01-2002, 10:19 PM

Lakewood already has them available for our cars.

Lakewood traction bars for our ludes!!!

We'll, at least they should be out soon.

SilverLudeSi · 03-01-2002, 10:27 PM

Interesting, so you think trying to get z10 to do them is pointless? I have never heard of lakewood, do you have any more info on these?

Dr. James · 03-02-2002, 04:45 PM

Why do you want Radius Arms on your Prelude, when it is already equipped with them from the factory? All they do is prevent the Lower control arm from pitching front to rear. It is the arm that is connected from the lower control arm to the front crossmember. The reason they sell like hotcakes for the Civics and Tegs, is because they are not equipped with them from the factory. That's also most likely the reason why no one has released a set for the Prelude yet. You can also use this arm on the Prelude to adjust front Caster, by adding and removing shims from the front of the Radius Arm.