I popped the tranny off my H22 to take off the clutch and whatnot... Anyways, I compared the clutch that was in there with the Exedy I have and crap, the friction material on the exedy is not as wide!
This is the clutch that was installed:
This is the clutch I bought:
I bought it off the ClutchMasters site. Part number 08-014. The part number for the Stage 1 is 08-014-HD00, so this should be the right one... right?
Also, the aligning tool they sent me doesn't fit into the hole in the flywheel.
Linear Mode
