Honda Prelude Forum - Prelude Online.com - View Single Post - Is 0.65 bar of boost too much for stock internals?

Quaalude · 04-13-2002, 04:12 PM

i have a apexi avcr boost controller and the 0.65 bar spring....i am able to run lower boost than the WG spring (0.55 kg/cm2 = appox. 8 psi)....the boost controller controls the activation of the WG by T'ing the pressure inlet line between the WG (lower port) and compressor housing....the other vac. hose from the actuator valve of the boost controller goes to the top port of the WG

04-13-2002, 04:12 PM	#3 (permalink)
Quaalude Registered User Join Date: Dec 2001 Location: Growing up in the hood Posts: 688 iTrader: (0)	i have a apexi avcr boost controller and the 0.65 bar spring....i am able to run lower boost than the WG spring (0.55 kg/cm2 = appox. 8 psi)....the boost controller controls the activation of the WG by T'ing the pressure inlet line between the WG (lower port) and compressor housing....the other vac. hose from the actuator valve of the boost controller goes to the top port of the WG __________________ Out of comission again.