Quote:
Originally Posted by wavyg
I'm glad I did a search before jumping in over my head. I bought a JDM foglight setup off of e-bay and I just finished replacing all of the power and ground wires in the wiring harness before I put it in, as well as running a new fog lead from the front over the wheelwell etc. Anyway, I went with 14 guage for the power wires and 16 guage for the grounds. I basically recreated the entire harness though and threw out the wires they sent me which were 18 and 20 guage. It came with an HID conversion kit so once I saw your post I knew what I should do. Guess I should get out there and finish it up!
|
You may want to replace that 16 gauge ground wire with the same gauge as the power wires or lower. A rule of thumb is to always the use same or thicker wire than your power wires.
