everything is pretty much taped off..
except the driverside door frame..
i got my tires in (i sent my 225-50-16s back for 215-45-16s)
i picked up some brand new slotted EBC rotors for $50 yesterday
and i picked up the painted headlight housings so i can put the retrofitted headlights back together this weekend once im done wet sanding, buffing and sealing the headlight lenses.
i started by finishing off the sanding and buffing of the lenses.
as you can see i removed the black on the bottom of the headlight and the black on the edge of the headlight.
then i taped off the lense so i could paint the portions grey that used to be black. this will flow better with the color matched inserts. i used a grey primer that matched pretty decent.
here is how it came out:
i started putting everything back together
for some reason getting the lense back on to the housing has been a ***** because of a slight distortion in the housing from oven baking them. but after some clamps and some wait time it seems to be holding up.
FINAL PRODUCT
and tires are all mounted, balanced, and the wheels are ready to be slapped on the car.
thanks for looking.
_zac
