Quote:
Originally Posted by BBYlude
Here's the necessary info though:
terminal 85 - aux channel output wire from keyless entry (must be negative trigger)
terminal 86 - +12v constant
terminal 87 - Grnd
terminal 87a - not used
terminal 30 - output to trunk popper
|
The trunk popper only has 1 power wire. The trunk popper is grounded through it's own body when bolted into the trunk. The trunk popper needs a momentary +12V pulse.
Your alarm's aux output is usually a ground signal. The ground signal activates the relay, the realy sends +12V to the trunk popper.
BBYlude almost has it correct,
terminal 87 should be
+12V Constant, NOT ground
this completes the circuit and sends power to the trunk popper.