|
Keep in mind the H1s don't really fit quite in the 5G housing. The 5G lude uses a "butterfly" type base that the bulb plugs into. This bulb won't plug into it. You can probably drill out one of the bases to pass through the wires, or you could use the supplied grommet in place of the base (though the bulb becomes a little floppy in the housing). I was selling these on the board before and quit selling them for this reason.
I can say, though, that the quality on the kits is good and I have only had one issue with the ones that I did sell (5000K color has a very slight green halo off to one side in the 5G housing).
|