Honda Prelude Forum - Prelude Online.com - View Single Post

sr71blackprelud · 10-18-2006, 05:10 PM

Do this
1) go here and install AlternaTiff and register your download (it's free so no worries)

http://www.alternatiff.com/

then go here
http://patft.uspto.gov/netacgi/nph-P...&RS=PN/6959679
this is the US Patent office website showing the patent that AEM applied for on the V2 intake

Click on the images button or click the following link
http://patimg2.uspto.gov/.piw?Docid=...iew+first+page
this will show you the AEM design

I doubt that you are going to get a good image from anyone showing the inside tube... the angle of the piping, you just can't get a good image...

But looking over the patent forms you can see that the inner tube has no holes in it... and the outter tube is enclosing it with the filter on

Hope this helps.

10-18-2006, 05:10 PM	#9 (permalink)
sr71blackprelud PreludeOnline Premium Member Join Date: Feb 2005 Posts: 37 iTrader: (0)	how about this Do this 1) go here and install AlternaTiff and register your download (it's free so no worries) http://www.alternatiff.com/ then go here http://patft.uspto.gov/netacgi/nph-P...&RS=PN/6959679 this is the US Patent office website showing the patent that AEM applied for on the V2 intake Click on the images button or click the following link http://patimg2.uspto.gov/.piw?Docid=...iew+first+page this will show you the AEM design I doubt that you are going to get a good image from anyone showing the inside tube... the angle of the piping, you just can't get a good image... But looking over the patent forms you can see that the inner tube has no holes in it... and the outter tube is enclosing it with the filter on Hope this helps.