|
Questions about Oil pressure in the Head
I'm having issues hitting vtec in my motor(there is signal to the vtec solinoid and the solinoid clicks when attached to a 12 volt source). I checked the block and the oil pressure is fine there. I tried checking the oil at the front of the head where the Helms manual tells you to check. But, I don't have a meter accurate enough to read at such a low rate (7psi). So, I checked the oil pressure at the location below (stole pic from H-T) does anyone know what the pressure should be there? I'm only reading 35psi tops when I rev the motor to 3500.
Any help would be appreciated.
__________________
Sash
"When you start down the slippery slope of actually adding HP to your engine, it is like trying crack for the first time. The added rush feels awesome, but soon enough you will get used to that dosage, and the amount must be upped. " - author unknown
|