Seems to be the breakdown of the week......here's the symptoms:
-Just drove the car on vacation. As I am pulling back into my neighborhood (after 360 miles nonstop) the car will NOT go into ANY gears without really pushing hard to slam it into position.
- The clutch slave cylinder was recently replaced, there are no other fluid leaks with the clutch line or tranny housing. Slave cylinder pushrod has good movement
- tranny will engage gears normally and smoothly with engine off, but once the engine is started it will not go into any gear unless I really slam it into place.
-The idle is rough at resting position with the tranny in gear with clutch pushed in.
Let me know if you have any ideas.........hopefully cheap ones.
brad