|
hey i saw this an article of honda tunning.....so from the mag im reading you'll need:
(1) msd power tower, (1) tube oo epoxy, 5/32 and 3/8 inch drill bits :hacksaw or bench grinder (1)distributor cap Drill and an old feeler gauge
ok first locate the contactor inside the coil, take the 5/32 and drill it out, if the aluminum collar pops out just pop it back in.
(2)Turn the cap over and the the 3/8 inch drill and drill only about 1/4inch into the cap, this is only so you can recess the power tower.
(3)insert the power tower from inside of the cap, and they cut some of the tower off for being to long
(4)turn over the cap insert the red insulator, than the brass terminal nut.
(5)mix the epoxy in an old tray or something, than by using the feeler gauge pour the epoxy on the inside of the cap of the hole oyu made.
(6)now your done in 20-30mins...
thats what honda tunning said it was last months mag, it has the silver 95 prelude on the cover thats the only reason i bought it.
__________________
|
