03-04-2005, 08:33 PM
|
#3 (permalink)
|
|
Estoy Tranquilo
Join Date: Jul 2001
Location: SFV / The LBC, CA
Posts: 3,502
|
Quote:
[sub[ex]:
You can use the jdm distributor. All you have to do is remove the internal COIL, there are 2 wire connected to the COIL. The one with 2 connectors you keep and just tie the extra connector off. Make sure its not grounding out or you will fry your distrib.(I learnt that the hard way) Remove the second wire. If your carefull you can take a wire from an extra harness and use the same crimp connector. You need to connect that wire to the open connector, punch a hole in the rubber seal, and wire it into the open spot on the wire harness. Connect the extrenal coil and a external coil cap to the distrib and your set.
|
searched...
__________________
Tyler
|
|
|