|
ok well it looks like i have it wired properly... i think.
when i turn on the lights, the low outer low beam h4's come on, then when i put it in high beam mode, the inner h1's come on as well. however, i do not have it set up so that the high beams on the h4's come on. i didn't do this cause when i tested the leads that ran to the h1's i got some results that i think are pretty funky.
ok, when the low beams are on, i measure current on the red/green wire, and i also measure current on the red/blue wire, then when i put the high beams on, i measure current from only the red green wire, but not from the red/blue. how this makes sense, i have no idea. i would figure that since the h1's are on, you would be able to measure current through both of the wires and my results would be the other way around. anyway, how they are wired right now isn't so bad, but if anyone could please post up some wiring diagrams it would really help. thanks
|