|
The block is different between the SH and base. Your halfshaft will not bolt to the block without a custom fabricated bracket. Since the ATTS unit bolts to the rear of the block it requires different mount points.
Also, you will need to source a OBD-I P13 to make that motor work, not to mention you will have to use your current tranny with its longer gears.
You are best off just ordering a JDM H22A with a tranny (and while your at it get an LSD) and swapping that in, just remember one thing, you usually get what you pay for.
HTH,
__________________
Jason
|